v2.0.10-8汾޸2018-06-11
1޸APģʽUDP ServerЧ
2岿ֻSmartlink⡣
3macȵòipַ⡣
4ӻpatch޸ƶsocketݷ⣻
5socket֧Ŀ5չ7.
6smartlink v3 ָͨ ûԶϢ ʹAPI hfsmtlk_enable_uinfo_in_password;
7ɹ֮鲥ϱɹ״̬
8Smartlinkɨŵʱ䡣
9޸ַڽsslʱ֤У⡣
10޸֮·⡣
11Сtcpic߳ʱƵʣݷ


v2.0.10-5汾޸2017-12-15
1ƻairport·ȡIPַ⡣
2SmartlinkAirkissƻֻȵ㣬ģȡIPַ⡣
3DNS󲿷·ܲת⣬ID
4շЧ


v2.0.10-5 Version 2017-12-15
1.Fix fail to get IP from Apple Airport router.
2.Fix fail to get IP from IOS phone Wi-Fi hotpot when Smartlink or Airkiss.
3.Fix sometimes DNS fail, ID use random value.
4.Speed up data rate.


v2.0.09-8汾޸2017-04-14
 1.ģAPģʽDHCPż쳣⣬ն豸䲻ip.
 2,soft resetῨ(2.09-6汾д)
 3,httpdҳ;
 4.ŻDHCP,е· dhcp bootp flagsΪ broadcastʱòip⣬ȸΪUnicast.
 5.òַʱ򣬲ø DNS
 6.SIP120оƬGPIO25 26 27 
 7.SIP120̼nReadyŵGPIO18


v2.0.09-8 Version 2017-04-14
 1.Fix module AP mode dhcp server Bug which cause STA fail to get IP.
 2,Fix soft Reset cause module not work problem(only 2.09-6 version has this problem).
 3,Webpage upgrade applicaton and webapge file  need reboot manually before upgrade valid problem now it will auto reboot.
 4.Optimize DHCP client to get IP address
 5.Suuprt backup DNS to get IP from dns
 6.Add SIP120 chip SDK GPIO25 26 27 control
 7.Update SIP120 firmware nReady to GPIO18



v2.0.09-6汾޸2016-12-05
1.Web Serverܣ
¼ģIP/iweb.htmlwebpage.htmlļҳĬϵ¼admin,adminAT+WEBU޸ġ
ģIPҳ档
2.ӶSIP120LPT120G֧
3.·ӺDHCPòַ
4.Żsmarklink V7,߼
5.޸http_download_fileʱڴй©
6.AT+UPURLʧܺٴηʧ
7.smartlinkصû
8.ĬϹرDebug Uart1óGPIOģʽҪʹdebugϢܵĻͨѶAT+NDBGL=1,1ָdebugܣ

v2.0.09-6 Version 2016-12-05
1.Add Web Server function.
login with modules IP/iweb.html to load webpage.html file and reboot after upgrade. The deaulf login account&pass:admin,admin, it can be modified by AT+WEBU.
input module IP to open the webpage.
2.Add support for SIP120LPT120G.
3.fix bug for DHCP fail with some router.
4.Optimize smarklink V7.
5.Fix http_download_file API RAM leakage.
6.Fix AT+UPURL always fail when first fail to upgrade.
7.Add smartlink callback.
8.Default Close Debug Uart1, configure it as GPIO. If need to enable debug1 information output, input AT+NDBGL=1,1 with UART0.

v2.0.08-6汾޸2016-10-28
1. ֧ģõGDKHӲFlashͺţ֮ǰ汾֧boya Flash
ģFlashͺжͺţǰĳGDKHFlashͺϣµ˰汾

v2.0.08-6汾޸ݣ2016-10-28
1. Support the module internal GD,KH Flash Type, the previous version only support boya Flash.
We will use different Flash brand for our module, the previous version software only support boya flash, the module will stop running if the flash brand does not consist.
must upgrade to this version to support new GD/KH Flash type.


v2.0.08-5汾޸
Bug:
1. AT+TCPTOòΪ0ʱBug
2. AT+SMTLKûлظ+ok
3. http_download_fileʱʧ 
4. AT+WSCAN ɨʱwifiܳڹر״̬ȡ
5. AT+TCPTO,AT+TCPTOB TCPӳʱ׼
ӹ
1. AT+BVERѯboot汾
2. bootloaderBѡֲ֧Ϣboot汾1.14ִ֧˹ܡ
3. AT+WRMID֧Ϊ
4. TCPֶ֧
Ż
1. ô·ڵʱģĹ;
2. ڵ͹ģʽ,UDPʧ;

v2.0.08-5汾޸ݣ
Fix the following
1. Fix the AT+TCPTO=0 return error bug.
2. Fix the AT+SMTLK command no return bug.
3. Fix http_download_file API timeout no error bug.
4. Fix the AT+WSCAN no result when wifi is in sleep mode.
5. Fix the AT+TCPTO/AT+TCPTOB timeout count not accurate .
Add feature
1. Add AT+BVER
2. Add bootloader press B to clear the setting, boot 1.14 support this.
3. AT+WRMID support null value.
4. TCP send support multiple packet buffer.
Optimize
1. Optimize power consumption when module work in STA and no AP exist.
2. Optimize the UDP packet sometimes lost when in default powser save mode(AT+DISPS=auto,3)



v2.0.07-3汾޸ݣ
1,Żϵͳٶ
2,MCU OTAغUPGRADEļʱMCU OTAļ
3,޸Ĭãɹָ
4,SDKclose TCPʱֻص
5,AT+UPURLLPB100
6,get_user_default_rf_table API
7,Żhfsys_get_time
8,޸AT󳤶ʱchar͵ıλintֹ͡ATbuff仯ʱֳ
9,smartlink v7һ·жssid
10,͸buffer
11,flashblock(64KB) erase
12,Զblock erase

v2.0.07-3汾޸ݣ
1,Optimize the OS running
2,Add MCU OTA API function for SDK usage.
3,Support mass upgrade the config via HFUpdate tools
4,Fix the TCP close problem in SDK develop.
5,Support AT+UPURL to compatilbe with LPB100
6,Add get_user_default_rf_table for SDK usage.
7,Optimize the hfsys_get_time function
8,Modify the maximum AT command length.
9,Fix the Smartlink config problem when one router has a guest SSID with the main SSID(multiple SSID)
10,Add buffer for Throughput mode.
11,Add block erase for flash.
12,use block erase for module OTA upgrade.


V2.0.06
1,޸boot.s,160K,192KB RAM⣻
2,ӵ͹Զģʽݷͻ߽յݵʱ򣬲Ͻ͹ģһʱûշٽ͹ģ
3, ͹ĬΪԶ
4, tcp ǿЧʣ
5, wep ģʽ
6,AT+UPURL
7,ڴй©¿Źõ

V2.0.06
1,Modify boot.s, fix compatable problem when boot is below 1.12 for 160KB ram.
2,Add AT+DISPS auto mode, enter power save mode when some time does not receive data.
3,AT+DISPS default to auto
4,Optimize tcp send data
5,Fix smartlink sometimes stuck when router is WEP encryption.
6,Add AT+UPURL to upgrade.
7,Add hardware watchdog.

V2.0.05-05
1.    ֧SSID
2.    SDRAM32 KB Ҫboot v1.12)
3.    ŻDHCPCIPȡٶ
4.    DCDCģʽʹܵĸߵ
5.    SSL API֤鹦
6.    SSLӻƣSSLʱᷢʹ
7.    hfnet_tcp_listenaccept_callback쳣
8.    ֻƵõϵͳATSDRAMУӿִٶ
9.    airkissʱģ鿨
10.    LPB125̣
11.    hffile_userbin_write ӿڳ;
12.    socketa,socketb Ͽϻص飻
13.    socketaserverʱ򣬳ʱϿڷ͵tcp clientܽյ
14.    DebugڷdebugģʽҲ֧AT;
15.    ֧ļ;
16.    printfNDBGLС6Ŵӡ;

V2.0.05-05 Version
1.Support connect to hide SSID.
2.Add ram to 192KBneed to update the bootloader to 1.12
3.Optimize the DHCP, module get IP more fast.
4Fix high power comsumption when DCDC mode is enable(Only support for LPB120)
5.    Add API for SSL to load certificate
6.    Add SSL buffer, Fix bugs when continues sending data with SSL
7.    Fix not entering accept_callback when hfnet_tcp_listen 
8.Optimize the code execution time, put some code in RAM to execute
9.Fix module break when sometimes in airkiss.
10.Fix AT+NETP works as TCP server and TCP client fail to receive data
11.Support Debug UART AT command.
12.Support HFUpdate tools to upgrade config files.
13.    Add socketa,socketb callback when break and connet event



V2.0.04-6
1.֧˫SOCKETsocketa+socketbͬʱAT+NETP
2.֧SSL
3.벿·Ӽ
4.smartlinkص⣬smartlink·
5.ŻDHCPٶ
6.ӿŹģ鿨Զ
7.֧4·Station⣬AT+WAPMXSTAĬ֧1·STA.
8.ڴʹŻ


V2.0.04-6
1.Support socketa+socketbUpdate AT+NETP command
2.Support SSL(Use SDK to do this)
3.Fix some compatiblity problem with router
4.Fix Smartlink configure with hidden router SSID
5.Optimize DHCP
6.Add watchdog to reboot when works abnormal.
7.Support 4 channel STAAT+WAPMXSTA default 1 channel
8.Optimize RAM usage


v2.03-4
޸ĵ£
1,֧AT+DCDC͹İлDCDCmodeDCDC֧LPB120ӲV2.0ϰ汾
2,͸ͬʱ֧socketbsocketa
3,µwifi⣬
4,bug#724,softap֧ wpa2psk/aes
5,Żдٶ,ɼӿٶ
6,֧sockeb tcpudp,ԼصAT AT+TCPLKB,AT+TCPTOB,AT+TCPDISB
7,uart1gpioʹõʱϵ粻ʼuart1;
8,bug;
9,ӱݣ
10, hfsys_nvm_read/write API;
11,bug#729,AT+TCPDISB,on/offLPB100е෴
12,bug#725,HSF,͸ģʽµݲܽ봮ڻص
13,֧AT,AT+WALK,AT+WALKIND,AT+E,AT+NETP,AT+ASWD

v2.02-2:
#670 LPB120ƽ̨֧timerغ
#668 airkiss2.0ɹ,AT+WSKEYѯܲʵʲ
#663 debugڻӡfailCountģ鿨
#650 [SDK] TCP Server¹رĳӵAPI
#649 [SDK] TCP Clientض˿ÿһ
#648 غ
#616 MC300֧Airkiss 2.0